Hans Grohe 06061XX0 ユーザーズマニュアル

5

All other models: Install two Duotec strips 

directly on the carrier plate.  Install the remaining 

two strips on the back of the escutcheon.
Install the carrier plate gasket and carrier plate 

with the carrier plate screws.

Press the escutcheon very firmly over the carrier 

plate, so that the strips of Duotec interlock, produc-

ing a very firm hold.  
Install the handle.  Tighten the handle screw 

with a 3 mm Allen wrench.  The handle screw 

must engage the slot milled into the brass on the 

cartridge.  
Set the high temperature limit stop (optional) -- see 

page 8. 
Justify the handle -- see page 6.

Solaris oval escutcheon only:  Install the 

white spacers on the carrier plate (a).  Install two 

Duotec strips on the spacers (b).
Install the remaining two strips on the back of the 

escutcheon.