Tascam RC-F82 ユーザーズマニュアル

ページ / 20
 TASCAM RC-F82  
11
3 – Preparations
Connecting with an HS-P82
Use the included cable to connect the MAIN UNIT 
connector on the left side panel of this unit with the 
KEYBOARD connector on the HS-P82 unit. If you want 
to use an external PS/2 keyboard with the HS-P82 unit, 
connect the keyboard to this unit’s KEYBOARD connector. 
CAUTION
Connect and disconnect the connection cable only 
• 
when the HS-P82 unit power is OFF. Connecting and 
disconnecting the cable when the power is ON could 
cause damage to the HS-P82 and the fader units. 
The unit might not function properly if a PS/2 keyboard 
• 
that consumes a large amount of power is used.
Connecting with other 
equipment
If you connect the HS-P82 unit’s LINE OUT connectors to 
this unit’s LINE IN connectors, you can output its signal 
from both the LINE OUT 1 connectors and LINE OUT 2/
TALKBACK connectors on this unit. The HS-P82 unit only 
allowed a single line output connection, but through this 
unit two output connections are possible. 
CAUTION
When the TO LINE OUT 2 switch is ON, the HS-P82 unit’s 
line output signal will not be output from the LINE OUT 
2/TALKBACK connectors. If you want to output the line 
output signal from these connectors, set this switch to 
OFF
Using communication functions 
Connect the PHONES jack on the HS-P82 to the PHONES 
IN jack on this unit, and connect the outputs from 
devices that you want to receive communication from 
to this unit’s RETURN IN connectors. By doing this, you 
can monitor an analog mix of these signals through 
headphones connected to this unit’s PHONES jack.
Connect the LINE OUT 2/TALKBACK connectors to the 
inputs on the devices that you want to communicate 
with and use the outputs of those devices to listen to 
communication from this unit’s built-in microphone. 
BOOM OPERATOR
DIRECTOR
SOUND MIXER
HS-P82
MIC/LINE IN
PHONES
KEYBOARD
RC-F82
PHONES
MAIN UNIT
PHONES IN
RETURN IN 1
RETURN IN 2
LINE OUT 2/
TALKBACK
MIC
BOOM MIC
LINE OUT
LINE IN
LINE OUT
ON
OFF
TO LINE OUT 2
Swich
Example of connections for using the communication 
functions 
For details about using these features, see, “6 – 
Communication Functions” on page 16.