Tascam RC-F82 ユーザーズマニュアル

This unit has rotary controls and faders for 8 channels. 
The knobs can be used to adjust one of three parameters: 

the microphone input level (TRIM), the stereo position 

sent to the stereo bus (PAN) or the level sent to the stereo 

bus (LEVEL). The faders can be used to adjust one of two 

parameters: microphone input (TRIM) or the level sent to 

the stereo bus (LEVEL).
To set this, use the 

Volume

 

Fader

 

Mode

 item on the 

RC-F82

 page of the HS-P82. You cannot, however, set 

the knobs and faders to have the same functions. To open 

the 

RC-F82

 page on the HS-P82 unit, press this unit’s 

REMOTE SETUP [F4] key or follow the procedures below. 
1  Press the MENU key on the HS-P82 unit to open the 

REMOTE

SETUP

REMOTE

SETUP

RC-F82

Kob setting

Fader setting

Volume

Fader

Mode

TRIM

Microphone input level

PAN

Stereo position sent to the stereo bus

LEVEL

Level sent to stereo bus

Knobs can be set to one of three functions. The current 

setting can be confirmed by viewing the VOLUME MODE 

indicators. 
TRIM (microphone input)
Choose this setting to adjust the microphone input level. 

When you change the setting, the track name display area 

below the meters shows the gain value for a while.
This has the same function as the input trim knobs on the 

front panel of the HS-P82 unit. 

PAN (stereo positions sent to the stereo bus)
Choose this setting to set the left-right stereo position 

sent to the stereo bus. Turn it all the way to the left to 

send the signal completely to the left channel. Turn it all 

the way to the right to send the signal completely to the 

right channel. Send it to the center to send the signal 

equally to both left and right channels. 
This has the same function as the 

PAN

 knob on the 

PAN/

LVL

 page that opens when you touch the 

PAN/LVL

 

button on the Home Screen and on the 

CHx

 

SETUP

 

screens (channel setting screens where “

x

” is the channel 

number) of the HS-P82 unit. 

PAN/LVL page of the Home Screen

Channel setting screen

LEVEL (level sent to the stereo bus)
Choose this setting to adjust the level sent to the stereo 

bus. 
This has the same function as the 

2Mix

 

LVL

 knob on 

the 

PAN/LVL

 page that opens when you touch the 

PAN/LVL

 button on the Home Screen and on the 

CHx

 

SETUP

 screens (channel setting screens where “

x

” is the 

channel number) of the HS-P82 unit. Adjust it in a range 

from -∞ when turned all the way to the left and +10 dB 

when turned all the way to the right.

The same adjustments can be made using both this unit 

and the HS-P82. The adjustments made most recently 

will be used, regardless of which unit they were made 

with. For this reason, if you make an adjustment using