Tascam DP-008 ユーザーズマニュアル

TASCAM DP-008

TIP

RTZ and LRP below the

and



keys

are abbreviations for Return To Zero and

Last Recording Position, respectively.

Fast forward/rewind search

Press the Ô or  key when stopped

or during playback to rewind or fast

forward, respectively.
Each time you press one of these keys, the

speed increases from 10x to 50x, 100x and

1000x.

Repeat playback

Use the repeat playback function to play

the same part again and again.
The repeated passage is time between the
IN and OUT points.

Setting IN and OUT points

In addition to using them for setting the repeat

playback passage, the IN and OUT points are

also used for interval setting for track editing.

Moreover, the OUT point is used as the end

point of the master track when mastering.

Capturing IN and OUT points

IN and OUT points can be captured when

stopped, during playback or while recording.
1 Press the

IN/OUT

key to open the

I/O

SETTING

screen.

2 Press the

F3 (

)

key or

F4 (

OUT

)

key at

desired position (regardless of whether

the unit is stopped, playing or recording).

“

SET IN !

” or “

SET OUT !

” and the

captured time appear.

TIP

You can also use the F3 and F4 keys to

capture IN and OUT points when the Home

Screen is open.

[SET IN]

[SET OUT]

Editing IN/OUT points

1 When the

I/O SETTING

screen is open

(see the first screen figure in the previous

section), press the

F2 (

EDIT

)

key to open

the edit screen.

2 Edit the values of IN and OUT points

using the following guidelines.

Use the

•

(§) and

(¶) keys to move

the cursor between the IN and OUT

points.
Use the

•

 keys to move the cursor

between time fields.
Turn the

•

DATA

wheel to change the value

at the cursor position.

3 When finished editing, press the

HOME

key to return to the Home Screen.

NOTE

In the following cases, IN and OUT points

cannot be captured or edited.

7 – Recorder Functions