Tascam DP-008 ユーザーズマニュアル
TASCAM DP-008
57
2 After setting the IN and OUT points,
press the record (º) and
IN/OUT
keys at
the same time to enter auto punch in/out
mode.
3 Press the playback (Á) key.
Playback begins from two seconds before
the IN point, and the sound monitored
switches at the IN point from the track
playback sound and the input sound to just
the input sound. The
REC
indicator blinks
when between the IN and OUT points.
When playback reaches the OUT point,
the track playback sound and the input
sound becomes the monitored sound again,
and the
REC
indicator stops blinking and
turns off. Playback automatically stops one
second after the OUT point.
You can repeat rehearsal until you are
satisfied.
satisfied.
Using auto punch in/out to
record
When you are done rehearsing, you can use
auto punch in/out for recording.
1 While in auto punch in/out mode, press
1 While in auto punch in/out mode, press
and hold the record (º) key, and press
the playback (Á) key.
In the same way as during rehearsal,
In the same way as during rehearsal,
playback begins from two seconds before
the IN point. Recording occurs and the
record indicator lights between the IN and
OUT points.
2 One second after reaching the OUT
point, the recorder automatically stops,
auto punch in/out mode is exited and the
transport locates to two seconds before
the IN point.
NOTE
Auto punch in/out mode cannot be
•
entered during repeat mode or if no REC
key has been pushed.
Auto punch in/out can be undone.
Auto punch in/out can be undone.
•
7 – Recorder Functions