Roland SP-555 ユーザーズマニュアル

 

The SP-555 supports CompactFlash cards (type I) having a 
capacity of from 32 MB up to 2 GB.

 

* You can’t use Type II cards such as Microdrives.

 

As of this date, Roland has verified that the SP-555 will work 
correctly with the following memory cards.

 

* Even cards of the identical model may be unusable due to 

differences in the specific design of the card or differences in 
the conditions of use. We cannot completely guarantee all 
operation with the above models.

 

When the SP-555 is shipped from the factory, special screws 
are attached to the bottom panel at the locations marked by 

 

★

 

. With the memory card cover attached, you can use a 

Phillips screwdriver to remove these screws and reinstall 
them in the CARD LOCK screw holes, making it impossible 
to remove the memory card cover, and helping to prevent 
theft of the CompactFlash card.

 

When turning the unit upside-down, get a bunch of 
newspapers or magazines, and place them under the four 
corners or at both ends to prevent damage to the buttons and 
controls. Also, you should try to orient the unit so no buttons or 
controls get damaged.

 

When turning the unit upside-down, handle with care to avoid 
dropping it, or allowing it to fall or tip over.

* You must use only these screws. Using any other screws will 

cause malfunctions.

 

Sandisk

SDCFH-2048-903 (2GB)
SDCFX3-1024-903 (1GB)

IO Data

CF115-256M (256MB)
CF115-512M (512MB)

Buffalo

RCF-X128MY (128MB)
RCF-X256MY (256MB)
RCF-X512MY (512MB)
RCF-X1GY (1GB)

Hagiwara Sys-Com

HPC-CF512ZP (512MB)
HPC-CF2GZP (2GB)
HPC-CF1GZ2F (1GB)
HPC-CF2GZ2F (2GB)

★

SP-555_e.book 44 ページ ２００７年６月２５日　月曜日　午前９時９分