Roland SP-555 ユーザーズマニュアル

ページ / 80
 
45
 
About CompactFlash
 
Never insert or remove a CompactFlash card while this unit’s 
power is on. Doing so may corrupt the unit’s data or the data 
on the CompactFlash card.
 
1.
 
Switch off the SP-555’s power.
 
2.
 
Remove the memory card cover.
 
3.
 
Insert the CompactFlash card in the front panel card 
slot.
 
4.
 
Attach the memory card cover.
 
Carefully insert the CompactFlash card all the way in–until it is 
firmly in place.
 
If you’re using a CompactFlash card for the first time, you must 
format it using the SP-555. The SP-555 will not recognize a 
CompactFlash card that was formatted by another device.
 
1.
 
Switch off the SP-555’s power.
 
2.
 
Remove the memory card cover.
 
3.
 
Push the eject button located beside the front panel 
card slot. The CompactFlash card will pop out partially. 
Grasp the CompactFlash card and pull it out toward 
yourself.
 
4.
 
Attach the memory card cover.
 
When you format a CompactFlash card, all data on that card 
will be erased.
 
1.
 
While holding down [CANCEL], press [REMAIN].
 
BANK [C/G]–[F/J] will blink, and the display will 
indicate “FMt.”
 
2.
 
Press any one of the BANK [C/F]–[F/J] buttons.
 
BANK [C/F]–[F/J] will change from blinking to lit, and 
[DEL] will blink.
 
If you decide not to format the card, press [CANCEL].
 
3.
 
Press [DEL].
 
[DEL] will light, and formatting will begin.
During the formatting process, the dot in the display will 
blink.
When the blinking stops, formatting is complete.
 
Never turn off the power while the dot is blinking. Doing so 
may damage the CompactFlash card, rendering it unusable.
 
Don’t modify or delete the files or folders that are created 
when a CompactFlash card is formatted. The SP-555 will not 
recognize the card correctly if you do so.
 
Inserting and removing 
CompactFlash cards
 
Inserting a CompactFlash card
Removing a CompactFlash card
 
Formatting a CompactFlash card 
(initializing)
SP-555_e.book 45 ページ 2007年6月25日 月曜日 午前9時9分