Roland S-1608 ユーザーズマニュアル
6—Using the S-1608/S-0816 System
S-1608/S-0816 Digital Snake Owner’s Manual
47
The S-1608, S-0816, and S-4000R have system status indicators that allow you to monitor the integrity
of the component connections when the system is powered up.
of the component connections when the system is powered up.
Power Indicators
S-1608/S-0816
fig.6-30.eps
This indicator lights when the unit is receiving power from its internal
power supply.
power supply.
S-4000R
fig.6-31.eps
The POWER indicator on the S-4000R will light when it’s receiving power
from an S-1608 or S-0816.
from an S-1608 or S-0816.
REAC System Indicators (REAC Communication)
ffig.6-33.eps
The S-1608, S-0816, and S-4000R have REAC indicators that light when
REAC communication is established. If communication fails, these
indicators flash and then go out.
REAC communication is established. If communication fails, these
indicators flash and then go out.
REMOTE (CTRL) Indicators (Remote Communication)
The S-1608 and S-0816 have REMOTE indicators, and the S-4000R has CTRL indicator, that show
when RS-232C communication is established within the system.
when RS-232C communication is established within the system.
•
On the S-1608 and S-0816 units
—
fig.6-34.eps
•
REMOTE lights when an RS-232C device (such as the S-
4000R) is connected to the S-1608/S-0816 System and
communication is established.
4000R) is connected to the S-1608/S-0816 System and
communication is established.
•
If no RS-232C device is connected to the S-1608/S-0816
System—or if a device is connected and communication is
not established—REMOTE will not light.
System—or if a device is connected and communication is
not established—REMOTE will not light.
•
If the RS-232C device is disconnected after communication
has been established, REMOTE will flash for 10 seconds.
has been established, REMOTE will flash for 10 seconds.
•
On the S-4000R
—CTRL lights when communication is established with the S-1608/S-0816
System. If communication fails, CTRL will flash.
System Status Indicators
For more information about the system status indicators, see
Appendix A: Troubleshooting
.
REMOTE indicator
S-1608_e.book 47 ページ 2007年4月23日 月曜日 午後12時57分