Roland S-1608 Manual Do Utilizador

 

6—Using the S-1608/S-0816 System

 

S-1608/S-0816 Digital Snake Owner’s Manual

47

 

The S-1608, S-0816, and S-4000R have system status indicators that allow you to monitor the integrity
of the component connections when the system is powered up.

 

fig.6-30.eps

 

This indicator lights when the unit is receiving power from its internal
power supply.

 

fig.6-31.eps

 

The POWER indicator on the S-4000R will light when it’s receiving power
from an S-1608 or S-0816.

 

ffig.6-33.eps

 

The S-1608, S-0816, and S-4000R have REAC indicators that light when
REAC communication is established. If communication fails, these
indicators flash and then go out.

 

The S-1608 and S-0816 have REMOTE indicators, and the S-4000R has CTRL indicator, that show
when RS-232C communication is established within the system.

•

 

—

 

fig.6-34.eps

 

•

REMOTE lights when an RS-232C device (such as the S-
4000R) is connected to the S-1608/S-0816 System and
communication is established. 

•

If no RS-232C device is connected to the S-1608/S-0816
System—or if a device is connected and communication is
not established—REMOTE will not light.

•

If the RS-232C device is disconnected after communication
has been established, REMOTE will flash for 10 seconds.

•

 

—CTRL lights when communication is established with the S-1608/S-0816

System. If communication fails, CTRL will flash.

 

For more information about the system status indicators, see 

 

.

REMOTE indicator

S-1608_e.book 47 ページ ２００７年４月２３日　月曜日　午後１２時５７分