Korg Triton Studio ユーザーズマニュアル

This effect modulates the volume level of the input signal. 
The effect is stereo, and offsetting the LFO of the left and right 
phases from each other produces a tremolo effect between left 
and right.

This parameter selects the LFO waveform. Vintage wave simu-
lates the characteristics of the tremolo created on a guitar ampli-
fier. Combining this effect with the Amp Simulation will make a 
realistic, vintage tremolo amplifier sound.

This parameter determines the difference between the left and 
right LFO phases. A higher value will simulate the auto-pan effect 
in which the sound is panned between left and right.

This effect uses the input signal level to modulate a stereo 
tremolo. You can simulate a tremolo effect that becomes 
deeper as it fades out while the level gets lower.

These parameters set the modulation via an envelope (input sig-
nal level).
The “LFO speed” is obtained by adding the “LFO Frequency” 
value to the “Envelope Amount” value multiplied by the input 
signal. The LFO modulation depth is obtained by adding the 
Depth value to the “Envelope Amount” value multiplied by the 
input signal level.
• The following example indicates that the “Depth” is 0 with an 

LFO Frequency of 1.0Hz and the maximum input, and that 
the “Depth” is 100 with a Frequency of 8.0Hz with zero input.
“LFO Frequency [Hz]”=8.0, “Envelope Amount [Hz]”=–7.0

a

LFO Waveform

Triangle, Sine, Vintage, Up, Down

Selects LFO Waveform

☞

LFO Shape

–100...+100

Determines how much the LFO waveform is changed

☞

 Fx:020

b

LFO Phase [degree]

–180...+180

Sets the LFO phase difference between the left and right

☞

c

LFO Frequency [Hz]

0.02...20.00Hz

Sets the LFO speed

☞

 Fx:009, 

Src
Selects the modulation source of LFO speed

Off...Tempo

Amt

–20.00...+20.00Hz

Sets the modulation amount of LFO speed

d

BPM/MIDI Sync

Off, On

Switches between using the frequency of the LFO speed and using 
the tempo and notes

☞

 Fx:009, 

BPM
Selects MIDI Clock and assigns tempo

MIDI, 40...240

☞

 Fx:009

Base Note

             

Selects the type of notes that specify the LFO speed

☞

 Fx:009

Times

x1...x16

Sets the number of notes that specify the LFO speed

☞

 Fx:009

e

Depth
Sets the depth of LFO modulation

0...100

Src

Off...Tempo

Selects the modulation source of the depth of modulation

Amt

–100...+100

Sets the modulation amount of the depth of modulation

f

Wet/Dry

Dry, 1:99...99:1, Wet

Src

Off...Tempo

Amt
Sets the modulation amount of the effect balance

–100...+100

a

Envelope Sens (Envelope Sensitivity)
Sets the envelope sensitivity of the input signal

0...100

Envelope Shape

–100...+100

Sets the envelope curve shape of the input signal

b

LFO Waveform

Triangle, Sine, Vintage

Selects LFO Waveform

LFO Shape

–100...+100

Determines how much the LFO waveform is changed

☞

 Fx:020

c

LFO Phase [degree]

–180...+180

Sets the LFO phase difference between the left and right

☞

 Fx:032

d

LFO Frequency [Hz]
Sets the LFO speed

0.02...20.00Hz

☞

Envelope Amount [Hz]

–20.00...+20.00Hz

Sets the changes of the LFO speed according to the input signal 
level

☞

e

Depth
Sets the depth of LFO modulation

0...100

☞

Envelope Amount

–100...+100

Sets the changes of the modulation depth according to the input sig-
nal level

☞

f

Wet/Dry

Dry, 1:99...99:1, Wet

Src

Off...Tempo

Amt
Sets the modulation amount of the effect balance

–100...+100

+