Korg Triton Studio ユーザーズマニュアル

Select the type of phaser LFO and tremolo LFO for the “Type” 
parameter. How the effect sound moves or rotates depends on the 
type of LFO. Selecting “LFO Phase” enables you to offset the tim-
ing of the phaser peak and control a subtle movement and rota-
tion of the sound.

The “Phaser Wet/Dry” parameter sets the balance between the 
phaser output and the dry sound. The “Wet/Dry” parameter sets 
the balance between the final phaser and tremolo output level and 
the dry sound.

This effect creates a metallic sound by applying the oscillators 
to the input signal. Use the LFO or Dynamic Modulation to 
modulate the oscillator to create a radical modulation. Match-
ing the oscillator frequency with a note number will produce 
a ring modulation effect in specific key ranges.

This parameter enables you to set the damping amount of the 
high range sound input to the ring modulator. If the input sound 
contains lots of harmonics, the effect may sound dirty. In this case, 
cut a certain amount of high range.

This parameter determines whether or not the oscillator fre-
quency follows the note number.

This parameter sets the oscillator frequency when “OSC Mode” is 
set to Fixed.

These parameters for the oscillator are used when “OSC Mode” is 
set to Note (Key Follow). The “Note Offset” sets the pitch differ-
ence from the original note in semitone steps. The “Note Fine” 
parameter fine-adjusts the pitch in cent steps. Matching the oscil-
lator frequency with the note number produces a ring modulation 
effect in the correct key.

g

Tremolo Shape
Sets the degree of the tremolo LFO shaping

–100...+100

☞

 Fx:020

h

Tremolo Depth
Sets the tremolo modulation depth

0...100

Src

Off...Tempo

Selects the modulation source for the tremolo modulation depth

Amt

–100...+100

Sets the modulation amount of the tremolo modulation depth

i

Wet/Dry

Dry, 1:99...99:1, Wet

☞

,

 

Src

Off...Tempo

Amt
Sets the modulation amount of the effect balance

–100...+100

a

Pre LPF

0...100

Sets the damping amount of the high range input to the ring modula-
tor

☞

b

OSC Mode

Fixed, Note (Key Follow)

Switching between specifying the oscillator frequency and using a 
note number

☞

c

Fixed Frequency [Hz]

0...12.00kHz

Sets the oscillator frequency when OSC Mode is set to Fixed

☞

,

Src

Off...Tempo

Selects the modulation source for the oscillator frequency when OSC 
Mode is set to Fixed

Amt

–12.00...+12.00kHz

Sets the modulation amount of the oscillator frequency when OSC 
Mode is set to Fixed

d

Note Offset

–48...+48

Sets the pitch difference from the original note when OSC Mode is 
set to Note (Key Follow)

☞

Note Fine
Fine-adjusts the oscillator frequency

–100...+100

☞

e

LFO Frequency [Hz]

0.02...20.00Hz

Sets the LFO speed of the oscillator frequency modulation

☞

 Fx:009, 

Src
Selects the modulation source of LFO speed

Off...Tempo

Amt

–20.00...+20.00Hz

Sets the modulation amount of LFO speed

f

BPM/MIDI Sync

Off, On

Switches between using the frequency of the LFO speed and using 
the tempo and notes

☞

 Fx:009, 

BPM
Selects MIDI Clock and assigns tempo

MIDI, 40...240

☞

 Fx:009

Base Note

             

Selects the type of notes that specify the LFO speed

☞

 Fx:009

Times

x1...x16

Sets the number of notes that specify the LFO speed

☞

 Fx:009

g

LFO Depth

0...100

Sets the depth of LFO modulation for the oscillator frequency

Src

Off...Tempo

Selects the modulation source of the depth of modulation

Amt

–100...+100

Sets the modulation amount of the depth of modulation

h

Wet/Dry

Dry, 1:99...99:1, Wet

Src

Off...Tempo

Amt
Sets the modulation amount of the effect balance

–100...+100