Korg Electric Keyboard ユーザーズマニュアル

For details on selecting pages in Sampling mode, refer to 
p.1.

Here you can set the input level and make other basic set-
tings for sampling (sample recording), and make basic set-
tings for multisamples and samples. Normally you will 
record samples in this page.

Select the multisample and index sample for sampling, and 
make basic settings.

Selects the multisample.
Each multisample consists of the samples for one or more 
indexes (an “index” is a range or zone of keys).
This parameter can also be set from 2.1: Sample Edit–4.1: 
Multisample.

Here’s how to create a new multisample.

1

Use numeric keys [0]–[9] to specify the new multisample 
number, and press the [ENTER] key to open the “Create 
New Multisample” dialog box.

2

If you wish to create a stereo multisample, check “Ste-
reo.”

3

To create the multisample, press the [F8] (“OK”) key. To 
cancel, press the [F7] (“Cancel”) key.
A multisample will be created as follows (example).

Mono

001: NewMS_ _ _ _ _ _001

Stereo

001: NewMS_ _ _ _ _ _001-L
002: NewMS_ _ _ _ _ _001-R

Select s the index that you wish to sample, or to which you 
wish to assign a sample.
Each zone within a multisample is called an “index.” For 
example on the 61-note keyboard, if a multisample is 
divided into zones of one octave (12 notes), there will be six 
zones. Each of these zones is called an index, and you can 
assign a sample to each index.

 The selected index. Choose the desired index.

 The total number of indexes in the multisample.

To select an index, hold down the [ENTER] key and 
play a note on the keyboard. The index that includes 
the note you played will be selected. The specified key 
will be the base key, and will be displayed in gray in 
“Keyboard & Index” (☞“Keyboard & Index”).

Rec

1.1: Recording

Record samples. Select the sample or mul-
tisample to record, and make various 
recording settings and AUDIO INPUT set-
tings. (

Smpl

2.1: Sample Edit Perform waveform editing and other editing 

on recorded samples or samples that were 
loaded into internal memory in Media 
mode. (

Loop

3.1: Loop Edit

Set sample playback parameters. Set start, 
loop start, end address, and turn loop or 
reverse playback on/off. (

MS

4.1: Multisample Edit multisamples. Set and edit sample 

assign, zone, and original key etc. 
(

Mem

5.1: Memory

View the remaining memory available for 
multisamples and samples. (

Ctrl

5.2: Controller

Controller settings. (

IFX

7.1: Insert Effect Select the insert effects used for sampling, 

and make settings for them. (

1.1–1a

1.1–1b

1.1–1d

1.1–1c