Atlas Sound TSD-MIX41 ユーザーズマニュアル

1601 Jack McKay Blvd. • Ennis, Texas 75119  U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

1.  Inputs 1-4 Level Controls - Adjusts the gain of the independent input signals. Turn clockwise to  

  increase the signal level and counter-clockwise to decrease it. Note: The Input Level Control

  knobs can be removed and replaced with a supplied security cover to prevent unauthorized  

 

 adjustment.

2.  Mixed Output Level Conrol - Adjust the output level of the summed signals from the four inputs.    

  Turn clockwise to increase the signal level and counter-clockwise to decrease it. Note: The  

 

  output level control knobs can be removed and replaced with supplied security covers to prevent    

  unauthorized adjustment.

3.  Power LED - Illuminates BLUE when 24VDC power is present.

4.  Output Signal LED - Illuminates Green when the input signal strength reaches 25mV to verify a

  signal path. Note: The LED will not illuminate if the output Level is turned Off.

5.  Output Peak LED - Illuminates Red when the output signal reaches 3dBV below when signal 

  clipping will occur. Occasional flashing is normal but if this indicator is continuously On, then  

 

  reduce the input level using the input level control on the front panel.

6.  Bracket Retainer Points - Each TSD includes two mounting brackets for securing the TSD to a  

 cabinet or wall. Remove screws and align the bracket with the panel hole before firmly tightening  

  the screws.

3

4

5

1

2

6

6

6

6