Siemens 9350 ユーザーズマニュアル
9300 Series User’s Guide
LEDs
Chapter 7 - Hardware Reference
Page 153
LEDs
All LEDs are found on the backplate of the meter, except the two Ethernet LEDs,
which are found on the left side (if you are facing front of meter).
which are found on the left side (if you are facing front of meter).
1
If the L2 LED does not blink once the meter is installed, contact Siemens Customer Service.
2
One or both of the Ethernet LED colors may differ from the standard yellow.
LED
Color
Function
L1
Red
Pulses once for every 1.8 Wh of energy measured
L2
Red
Blinks slowly to indicate CPU operation. It blinks rapidly to indicate communications through one of its
serial ports
serial ports
1
Ethernet LINK
Yellow
2
Remains on while an Ethernet carrier is present; if this LED is off, the Ethernet connection cannot be
established
Ethernet ACTIVITY
Yellow
2
Blinks to indicate Ethernet traffic
Profibus DE
Yellow
Indicates communications between the Profibus Master and the meter have been established
Profibus PWR
Red
Shows that the meter is powered