Oregon Scientific PS-M02 ユーザーズマニュアル
9
EN
CHANGE SETTINGS
Press and hold SELECT for 2 seconds. Then, press
UP or DOWN to change each setting. Press SELECT
to switch options.
Press and hold SELECT for 2 seconds. Then, press
UP or DOWN to change each setting. Press SELECT
to switch options.
REMOTE UNIT SET UP
Up to 3 remote units can be used with this product
to monitor outdoor temperature and humidity. The
measurement unit (
to monitor outdoor temperature and humidity. The
measurement unit (
°
C or
°
F) and channel number
(1, 2, or 3) switches are located in the battery
compartment, and should be set prior to installation.
compartment, and should be set prior to installation.
Additional remote units sold separately. If you
are using more than one remote unit, be sure to
select a different channel number for each unit.
select a different channel number for each unit.
INSTALLATION
Mount the remote unit on a flat surface using the recess
holes on the back of the unit.
Mount the remote unit on a flat surface using the recess
holes on the back of the unit.
For best results:
•
•
Before you insert the batteries, select the
measurement unit and channel number first.
measurement unit and channel number first.
•
Place the unit out of direct sunlight and moisture.
•
Do not place the remote unit more than
20 - 30 meters (60 - 90 feet) from the main
(indoor) unit.
20 - 30 meters (60 - 90 feet) from the main
(indoor) unit.
•
Position the unit so that it faces the main (indoor)
unit. Minimize obstructions such as doors, walls,
and furniture.
unit. Minimize obstructions such as doors, walls,
and furniture.
You may need to experiment with various locations to
get the best reception.
get the best reception.
NOTE
PS M02 English R18 op
7/24/03, 11:56 AM
9
Black