Oregon Scientific PS-M02 ユーザーズマニュアル
11
EN
SET OR CHANGE THE CLOCK
1.
1.
Press SELECT to switch to the Clock Mode. The
time will flash.
time will flash.
2.
Press and hold SELECT for 2 seconds to enter
the setting mode.
the setting mode.
3.
Select the 12/24-hour format, hour, and minute.
Press UP or DOWN to change the setting.
Press SELECT to confirm.
Press UP or DOWN to change the setting.
Press SELECT to confirm.
ALARM
When activated, the Melody Alarm starts quietly, then
gradually becomes louder. It shuts off after two
minutes. The LCD display lights up for the first
8 seconds.
gradually becomes louder. It shuts off after two
minutes. The LCD display lights up for the first
8 seconds.
SET ALARM
1.
1.
Press SELECT several times until the Alarm area
flashes.
flashes.
2.
Press and hold SELECT for 2 seconds to enter
the setting mode.
the setting mode.
3.
Select the hour, minute, melody (1 - 7) and
volume level (Lo or Hi). Press UP or DOWN to
change the setting. Press SELECT to confirm.
volume level (Lo or Hi). Press UP or DOWN to
change the setting. Press SELECT to confirm.
4.
Press SELECT again when you are finished.
SNOOZE
Press the SNOOZE/LIGHT button the top of the unit
to temporarily disable the alarm for 8 minutes. The alarm
icon will blink while Snooze is activated.
Press the SNOOZE/LIGHT button the top of the unit
to temporarily disable the alarm for 8 minutes. The alarm
icon will blink while Snooze is activated.
PS M02 English R18 op
7/24/03, 11:56 AM
11
Black