Oregon Scientific BAR210U ユーザーズマニュアル

4

Use  alkaline  batteries  for  longer  usage  and 

consumer  grade  lithium  batteries  in  temperatures 
below freezing.

The main unit will automatically search for the outdoor 
sensor. The sensor reception icon in the remote sensor 
area shows the status:

Main unit is searching for 
sensor.

A channel has been found.

Sensor data received.

 and “--.-

“

The sensor cannot be 
found. 

NOTE If the sensor is not found, check the batteries, 
obstructions and remote sensor location. 

•  Place the sensor out of direct sunlight and rain.
•  Position the sensor facing the main unit, minimizing 

obstructions.

•  Place the sensor in a location away from metallic or 

electronic objects.

•  Position the sensor close to the main unit during cold 

winter months.

This  product  is  designed  to  synchronize  its  clock 
automatically with a clock signal.
BAR210:

•  EU: DCF-77 signal: within 1500 km (932 miles) of 

Frankfurt, Germany.

BAR210U:
•  UK: MSF-60 signal: within 1500 km (932 miles) of 

Anthorn, England.

•  WWVB-60  signal:  within  3200km  (2000  miles)  of 

Fort Collins Colorado.

To enable / disable signal reception:
Press  and  hold 

  to  enable  or 

  to  disable  signal 

reception.

NOTE  Reception  takes  2-10  minutes.  If  the  signal  is 
weak, it can take up to 24 hours to get a valid signal.

 

To set the clock manually, disable the signal reception first.

1.  Press and hold CLOCK.

BAR210 EN R8.indd   4

2/15/08   12:10:32 PM