Hitachi C 8FSHE ユーザーズマニュアル

-5-

        Compound miter and bevel cutting

HITACHI

C 8FSE

C 8FSHE

C 8FB2

P1 and P2

P3

B

Miter left/right

45

°

Bevel left 45

°

Height x Width

(H x W)

45 x 220
(1-25/32” x 8-21/32”)
50 x 170
(1-15/16” x 6-11/16”)
with aux. board
width 30(1-3/16”)

45 x 220
(1-25/32” x 8-21/32”)

48 x 190

(1-7/8” x 7-15/32”)

50 x 212

(1-15/16” x 6-11/32”)

42 x 190

(1-21/32” x 7-15/32”)

Miter left/right

45

°

Bevel right

45

°

Height x Width

(H x W)

60 x 220
(2-9/16” x 8-21/32”)
70 x 170
(2-3/4” x 6-11/16”)
with aux. board
width 30(1-3/16”)

-

-

-

-

By turning the turn table to the left or right and inclining the saw blade section (head) to the left or right, the
Models C 8FSE and C 8FSHE are capable of compound cutting (bevel and miter, see Figs. 10-a and 10-b)
of workpieces with the maximum dimensions shown in Table 6.

        Splinter guard, also serving for cut alignment

When cutting the ends of a workpiece, splinters may drop on the saw blade and be cut into pieces. The
Models C 8FSE and C 8FSHE are equipped with a splinter guard to prevent such splinter cutting.
(Refer to "SELLING POINTS 

      .") Safe cutting is also ensured in bevel cutting because the splinter guard

is tilted with the saw blade.

        Groove cutting

The Models C 8FSE and C 8FSHE can cut grooves at desired depth by adjusting the 6-mm depth adjustment bolt
manually. (Refer to "Groove cutting procedures" described in the Instruction Manual for details.)

Fig. 10-b

Fig. 10-a

Unit: mm (inch)

Max.
cutting
dimension

Maker
Model

Base surface

Workpiece

Saw blade

Slide direction

Groove

[Model P1 and P2]

Fig. 11-b

Base surface

Workpiece

Saw blade

6 mm depth adjustment bolt

Slide direction

Groove

[Model C 8FSE/C 8FSHE]

Fig. 11-a