Grizzly G0656X ユーザーズマニュアル

-14-

G0656 8" Jointer with Built-In Mobile Base

Assembly

To assemble the jointer:

1. Carefully lay the stand on its side so you can

access the underside.

2. Bolt the wheel assembly to the stand with the

provided hardware, as shown in

Figure 7.

Note: Refer to the Inventory List on Page

11 for a list of components needed for ass-
sembly.

Figure 7. Example of bolting the wheel assembly

to the stand.

3. Turn the stand rightside up.

5. With the help of an assistant, lift the jointer

onto the stand.

6. Align the mounting holes on the jointer and

stand.

7. Secure the jointer to the stand with the M8-

1.25 x 50 cap screws, washers, and hex nuts,
as shown in

Figure 8.

The jointer is heavy. Seek

assistance when lifting it

onto the jointer stand.

Figure 8. Jointer secured to stand.

8. Using a 13mm wrench, loosen the motor

bracket fasteners shown in

Figure 9.

Note: DO NOT completely remove the motor
mount bolts.

Figure 9. Motor bracket fasteners (black

arrows); motor mount fasteners (white arrows).

Hex Bolt M8-1.25 x 50

Flat Washer 8mm

Hex Nuts

M10-1.5

Hex Bolts M10-1.5 x 55

Flat Washers 10mm

4. Remove the rear access panel from the

jointer stand.

��