Netgear UTM25EW-100NAS ユーザーズマニュアル

ページ / 480
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
11-48
Monitoring System Access and Performance
v1.0, September 2009
To generate the Network Statistic Report:
1. Locate the Network Statistics Report section on the Diagnostics screen.
2. Click Generate Network Statistics. The network statistics report is sent as an e-mail to the 
recipient that you specified on the Email Notification screen (see 
Rebooting and Shutting Down the UTM
You can perform a remote reboot (restart), for example, when the UTM seems to have become 
unstable or is not operating normally.
To reboot the UTM:
1. Locate the Reboot the System section on the Diagnostics screen.
2. Click the reboot button. The UTM reboots. (If you can see the unit: the reboot process is 
complete when the Test LED on the front panel goes off.)
To shut down the UTM:
1. Locate the Reboot the System section on the Diagnostics screen.
2. Click the shutdown button. The UTM shuts down.
Note: Rebooting breaks any existing connections either to the UTM (such as your 
management session) or through the UTM (for example, LAN users accessing the 
Internet). However, when the reboot process is complete, connections to the 
Internet are automatically re-established when possible.
Note: See also 
.
Note: You can shut down the UTM using the Web Management Interface, but you cannot 
start up the UTM using the Web Management Interface.