Sharp MX-M182D ユーザーズマニュアル
26
BEFORE USING THE MACHINE
2
Envelopes
Do not use the following envelopes, as misfeeds will occur.
• Envelopes with metal tabs, clasps, strings, holes, or windows.
• Envelopes with rough fibres, carbon paper, or glossy surfaces.
• Envelopes with two or more flaps.
• Envelopes with tape, film, or paper attached to the flap.
• Envelopes with a fold in the flap.
• Envelopes with glue on the flap to be moistened for sealing.
• Envelopes with labels or stamps.
• Envelopes that are slightly inflated with air.
• Envelopes with glue protruding from the seal area.
• Envelopes with part of the seal area peeled off.
• Envelopes with metal tabs, clasps, strings, holes, or windows.
• Envelopes with rough fibres, carbon paper, or glossy surfaces.
• Envelopes with two or more flaps.
• Envelopes with tape, film, or paper attached to the flap.
• Envelopes with a fold in the flap.
• Envelopes with glue on the flap to be moistened for sealing.
• Envelopes with labels or stamps.
• Envelopes that are slightly inflated with air.
• Envelopes with glue protruding from the seal area.
• Envelopes with part of the seal area peeled off.
CHANGING THE PAPER SIZE SETTING OF A TRAY
If the size of the loaded paper is different from the size shown in the display, follow the steps below to change the paper size setting of the tray.
The paper size setting cannot be changed during copying, printing, fax printing (when the fax option is installed), or interrupt copying, or when a
misfeed has occurred. However, if the machine is out of paper or out of toner, the paper size setting can be changed during copying, printing, and
fax printing.
See "PAPER"
The paper size setting cannot be changed during copying, printing, fax printing (when the fax option is installed), or interrupt copying, or when a
misfeed has occurred. However, if the machine is out of paper or out of toner, the paper size setting can be changed during copying, printing, and
fax printing.
See "PAPER"
for information on the specifications for the types and sizes of paper that can be loaded in the paper trays.
The paper size cannot be set for the bypass tray.
1
Press the [SPECIAL FUNCTION] key.
The special function
screen will appear.
screen will appear.
The screen shown above is the copy mode screen.
2
Press the [
] or [
] key to select
"PAPER SIZE SET".
3
Press the [OK] key.
The paper size setting
screen will appear.
screen will appear.
4
Press the [
] or [
] key to select the
paper tray for which the paper size is
being changed.
being changed.
Example: Tray 2
5
Press the [
] key.
The cursor moves to the
paper size selection
position on the right.
paper size selection
position on the right.
6
Press the [
] or [
] key to select the
paper size.
Example: Selecting B4 size
To change the size of another paper tray, press the
[
[
] key and then repeat steps 4 to 6.
: Shows tray "1".
: Shows tray "2".
: Shows tray "2".
For the paper trays and tray numbers, see
"PAPER"
"PAPER"
EXPOSURE
COLOUR MODE
PAPER SE
RESOLUT
RESOLUT
COPY
SCAN
SCAN
SPECIAL
FUNCTION
LINE
DATA
DATA
ON LINE
SPECIAL FUNCTION
ID CARD COPY
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
PQ
ACC
LEX SCAN
LEX SCAN
LEX SCAN
ED COPY
SPECIAL FUNCTION
ID CARD COPY
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
GHI
PQRS
BACK
OK
AN
PY
A4
A3
A3
B4
A4
B4
A4
A4R
PAPER SIZE SET
Note
A4
A3
A3
B4
A4
B4
A4
A4R
PAPER SIZE SET
A4
A3
A3
A3
B4
A4
A4
A4R
PAPER SIZE SET
A4
A3
A3
A3
B4
A4
A4R
PAPER SIZE SET