Sharp AR-650 ユーザーズマニュアル
51
HOW TO
MAKE
COPIES
4
Key in the desired copy quantity.
. After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.
align the slides to the edges of the originals.
5
Place the original(s) on the original feed
tray or on the glass.
Note: Remove any paper clips or staples from
originals before placing them on the
original feed tray.
original feed tray.
. After lifting the automatic document feeder,
place the original on the glass face down with
the bottom toward you and the left side
centered against the original scale.
the bottom toward you and the left side
centered against the original scale.
6
Press the START key.
Slides
Note: Remove copies made on special sheets
such as thick paper (23~35 lb.), OHP films
or sticker labels one by one. They should
not be allowed to stack up in the exit tray
or finisher (optional).
or sticker labels one by one. They should
not be allowed to stack up in the exit tray
or finisher (optional).