Sharp AR-650 ユーザーズマニュアル
52
14. INTERRUPT COPYING
The Interrupt Copy is a convenient feature that allows the user to pause a job that is currently
being done. This mode allows for a single copy to be made from either the bypass guide or
nominated cassette. Multiple copies are possible by pressing the START key once for every
copy requierd.
being done. This mode allows for a single copy to be made from either the bypass guide or
nominated cassette. Multiple copies are possible by pressing the START key once for every
copy requierd.
1
Press the INTERRUPT key.
The following message appears:
Job interrupted job 1 saved
Replace the original with a new original.
. After lifting the automatic document feeder,
place the original on the glass face down with
the bottom toward you and the left side
centered against the original scale.
the bottom toward you and the left side
centered against the original scale.
. Close the automatic document feeder slowly
after the original size has been detected.
Note: During the interruption, the automatic
document feeder and automatic duplexer
are inoperable.
are inoperable.
2
Select the desired copy size, exposure and
reproduction ratio.
4
3
After interrupt copying is finished, press
the INTERRUPT key again.
. This message will appear:
READY to resume job 1
5
Press the START key.
. You can make multiple copies by pressing the
START key once for each copy desired.
Note: Interrupt copying is not available during
scanning of the originals. Press the
INTERRUPT key when the scanning has
completed.
INTERRUPT key when the scanning has
completed.
HELP
ENERGY SAVER
TIMER
INTERRUPT
COPY
PRINTER/NETWORK