Sharp MX-M182 ユーザーズマニュアル
27
BEFORE USING THE MACHINE
7
Press the [OK] key.
A message asking you to
confirm the new paper size
setting will appear.
confirm the new paper size
setting will appear.
8
Press the [OK] key.
The selected paper size will be
stored and the display will
return to the base screen.
stored and the display will
return to the base screen.
DISABLING (ENABLING) AUTO TRAY SWITCHING
When auto tray switching is enabled and paper runs out during copying or printing, the job will continue using paper
from a different tray if that tray has the same size of paper in the same orientation. (This function does not operate
when using the bypass tray or when a fax is being printed.) This function has been enabled at the factory. If you
prefer to disable the function, follow the steps below.
from a different tray if that tray has the same size of paper in the same orientation. (This function does not operate
when using the bypass tray or when a fax is being printed.) This function has been enabled at the factory. If you
prefer to disable the function, follow the steps below.
1
Press the [SPECIAL FUNCTION] key.
The special function
screen will appear.
screen will appear.
The above screen appears in copy mode.
2
Select "PAPER SIZE SET" with the [
]
or [
] key.
3
Press the [OK] key.
The paper size setting
screen will appear.
screen will appear.
4
Press the [
] key repeatedly until
"AUTO TRAY SWITCHING" appears.
Move the cursor to the lowest tray and then press the
[
[
] key again. The above screen will appear.
5
Press the [OK] key.
When a checkmark does not appear in the checkbox,
the auto tray switching function will not operate.
the auto tray switching function will not operate.
6
Press the [
] key.
You will return to the
paper size setting screen.
paper size setting screen.
To re-enable auto tray switching, press the [OK] key in
the screen of step 5 so that a checkmark appears.
the screen of step 5 so that a checkmark appears.
OK
Affix the paper size label for the paper size
selected in step 6 to the label position on the
right end of the tray.
selected in step 6 to the label position on the
right end of the tray.
OK
Note
EXPOSURE
COLOUR MODE
PAPER SE
RESOLUT
RESOLUT
COPY
SCAN
SCAN
SPECIAL
FUNCTION
LINE
DATA
DATA
ON LINE
SPECIAL FUNCTION
ID CARD COPY
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
PQ
ACC
LEX SCAN
LEX SCAN
LEX SCAN
ED COPY
SPECIAL FUNCTION
ID CARD COPY
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
GHI
PQRS
BACK
OK
AN
PY
A4
A3
A3
B4
A4
B4
A4
A4R
PAPER SIZE SET
PAPER SIZE SET
AUTO TRAY
SWITCHING
SWITCHING
OK
PAPER SIZE SET
AUTO TRAY
SWITCHING
SWITCHING
A4
A3
A3
B4
A4
B4
A4
A4R
PAPER SIZE SET