Sharp MX-M182 ユーザーズマニュアル

This chapter explains how to use the copy functions.

This section explains how to make a regular copy.
If "Auditing mode" has been enabled 

, enter your 5-digit account number.

Align the upper left-hand corner 
of the original with the tip of the 

 mark.

The original size is 
automatically detected.

After placing the original, be 
sure to close the SPF/RSPF. If 
left open, parts outside of the 
original will be copied black, 
causing excessive use of toner.

To load paper, see "LOADING PAPER" 

An original up to A3 (11" x 17") can be 
placed on the document glass.

If the original is a non-standard size or the 
size was not detected correctly, see 
"SELECTING THE ORIGINAL SIZE" 

• If the auto paper select function has been 

disabled in the system settings 

, 

use the [PAPER SELECT] key to select 
the desired paper size.

• If you wish to use a size of paper different 

from the size automatically selected by 
the machine, use the [PAPER SELECT] 
key to select the desired paper size.

• Paper in a different orientation from the 

original can be selected if the auto paper 
select or auto image function has been 
selected. In this case, the image of the 
original will be rotated.

• To make a copy of a small original such as 

a card, follow the procedure in "USING 
THE BYPASS TRAY TO COPY A 
SPECIAL SIZE ORIGINAL" 

.

• To use the bypass tray, select it manually.

If you are making two or more copies each 
of multiple original pages, you can select the 
sort function to collate the copies into sets. 

A4

A4

100%

Ready to copy.

AUTO

AUTO