Sharp MX-M182 ユーザーズマニュアル
38
COPY FUNCTIONS
3
MANUAL RATIO SELECTION (PRESET COPY
RATIOS/ZOOM)
RATIOS/ZOOM)
1
Place the original in the document
feeder tray or on the document glass.
feeder tray or on the document glass.
2
Press the [COPY RATIO] key.
Copy ratios that can be
selected will appear.
selected will appear.
3
Select a preset ratio with the [
] or
[
] key, or set the ratio (zoom) with
the [
] or [
] key.
[
] key: Select a larger preset ratio
[
] key: Select a smaller preset ratio
[
] key: Decrease the ratio in increments of 1%
[
] key: Increase the ratio in increments of 1%
• Preset reduction ratios are: 86%, 81%, 70%, 50%
and 25% (95%, 77%, 64%, 50% and 25%). 25% can
only be selected when the original is placed on the
document glass.
only be selected when the original is placed on the
document glass.
• Preset enlargement ratios are: 115%, 122%, 141%,
200% and 400% (121%, 129%, 141%, 200% and
400%). 400% can only be selected when the original
is placed on the document glass.
400%). 400% can only be selected when the original
is placed on the document glass.
• Zoom ratios: Any ratio from 25% to 400% (50% to
200% when the original is placed in the document
feeder tray) can be set in increments of 1%. You can
use the [
feeder tray) can be set in increments of 1%. You can
use the [
] or [
] key to set the approximate ratio
and then press the [
] key to decrease the ratio or
the [
] key to increase the ratio.
• To decrease or increase the zoom ratio rapidly, hold
down the [
] or [
] key. However the value will
stop at the preset reduction or enlargement ratios.
To move beyond these ratios, release the key and
then hold it down again. (Note that if the key auto
repeat function has been disabled in the system
settings, the ratio will not change when the key is
held down. (See "DISABLE AUTO KEY REPEAT" on
To move beyond these ratios, release the key and
then hold it down again. (Note that if the key auto
repeat function has been disabled in the system
settings, the ratio will not change when the key is
held down. (See "DISABLE AUTO KEY REPEAT" on
.))
• To cancel a ratio setting, return the ratio to 100%
with the [
] or [
] key.
• The [COPY RATIO] key can be pressed to return the
ratio to 100%.
4
Press the [OK] key.
You will return to the base
screen.
screen.
5
Make sure that the desired paper tray
is selected.
is selected.
If the auto paper select function has been
enabled, the appropriate copy paper size will
have been automatically selected based on the
original size and the selected copy ratio. If the
auto paper select function has been cancelled or
if you are copying onto a different size paper, use
the [PAPER SELECT] key to select the paper
tray with the desired paper size.
enabled, the appropriate copy paper size will
have been automatically selected based on the
original size and the selected copy ratio. If the
auto paper select function has been cancelled or
if you are copying onto a different size paper, use
the [PAPER SELECT] key to select the paper
tray with the desired paper size.
6
Set the number of copies and press
the [START] key (
the [START] key (
).
COPY RATIO
ADDRESS
ADDRESS
ADDRESS
E
E
M
PAPER SELECT
RESOLUTION
RESOLUTION
RESOLUTION
RESOLUTION
AUTO IMAGE
FORMAT
BROADCAST
O
ORIG
ORIG
ORIG
115%
100%
100%
86%
COPY RATIO
ZOOM
PQ
ACC
LEX SCAN
LEX SCAN
LEX SCAN
ED COPY
GHI
PQRS
BACK
OK
AN
PY
WXYZ