Sharp AL-1633 ユーザーズマニュアル
14
INSTALLING THE TD CARTRIDGE
1
Push gently on both ends of the front
cover and open it.
cover and open it.
2
Remove the new TD cartridge from the
bag. Hold the cartridge on both sides
and shake it horizontally four or five
times.
bag. Hold the cartridge on both sides
and shake it horizontally four or five
times.
3
Remove the protective cover from the
TD cartridge by unlatching three
cover hooks from the holes on the
cartridge and then pulling the cover in
the direction indicated by the arrow in
the illustration.
TD cartridge by unlatching three
cover hooks from the holes on the
cartridge and then pulling the cover in
the direction indicated by the arrow in
the illustration.
4
Insert the TD cartridge along the
guides until it locks in place.
guides until it locks in place.
If there is any dirt or dust
on the TD cartridge,
remove it before
installing the cartridge.
on the TD cartridge,
remove it before
installing the cartridge.
5
Close the front cover.
The TD cartridge
replacement required
indicator (
replacement required
indicator (
) will go out.
4 or 5 times
• Before closing the front cover, make sure
that the TD cartridge is correctly installed.
• When closing the front cover, gently hold
both ends.
Note
AL-1633_1644_EX.book 14 ページ ２００３年１０月２３日 木曜日 午後８時２１分