Sharp UX-B800SE ユーザーズマニュアル

2. F

a

x to 

E-mail

Before the Fax to E-mail function can be 
used, you must configure the e-mail 
settings.

The e-mail settings specify your 
outgoing mail server, as well as your 
sender name, sender address, and 
other items that appear in the e-mail 
message to which scanned image files 
are attached.

♦

It is easiest to configure the e-mail 
settings in the machine’s Web page. 
The machine’s Web page can be 
accessed from any computer on the 
same network as the machine.

♦

The e-mail settings can also be 
configured using the machine’s 
operation panel.

Note: If you need to configure “POP 
before SMTP” settings, you must use 
the Web page.

If you do not know your SMTP server 
name or whether or not you need to 
configure “POP before SMTP” settings, 
ask your Internet service provider.

To access the Web page, you will need 
to know the machine’s host name or IP 
address (usually it is most convenient to 
use the host name).

To check the machine’s host name or IP 
address, follow the procedure in  
Checking your IP address and the 
connection (page 15), or print the 
Network Settings List (page 50).

Type in the host name or IP address of 
the machine in the Address bar of the 
Web browser on your computer.

The Web page menu will appear. Select 
E-mail Setup and configure the 
settings. For explanations of the 
settings, click Help in the Web page 
menu.

Note: If the Web page is used while the 
machine is in operation (except for 
voice calls using the handset), machine 
operation may become unstable.

Follow the steps below to display the e-
mail settings, and then configure each 
setting as explained in the table on the 
next page.

Press , 

then  

until 

[

E-MAIL SETTING] appears

.

Press , 

then  

repeatedly 

until the setting that you wish to 
configure appears. 

Press 

. (Note: This step is not 

necessary for the “FILE FORMAT” 
setting.)

Enter the required information for 
the setting as explained in the table 
on the next page.

After configuring the setting, the 
next e-mail setting will appear in the 
display. You can configure the next 

setting, or press 

 to exit.