Sharp UX-B800SE ユーザーズマニュアル

10.

 T

roub

le-

shooting

Dialing is not possible.

• Make sure the power cord is properly plugged into a 

power outlet.

• Make sure that the telephone line is properly 

connected to both the TEL. LINE jack and the wall 
jack (see page 11).

• Make sure that the machine is set to the correct 

dialing mode for your telephone line. See the 
procedure on page 45 and “DIAL MODE” on page 46.

The power is on, but no 
transmission takes place.

• Make sure that the receiving machine has paper.

• If the receiving machine is in manual mode with no 

attendant, reception will not be possible.

• Check the display for error messages.

• Pick up the handset and check for a dial tone. Dial the 

receiving machine manually and make sure that it is 
responding (you should hear a fax tone).

Nothing is printed at the 
receiving end.

• Make sure that the document for transmission is 

placed face down in the feeder.

A distorted image is 
received at the other end.

• Noise on the telephone line may cause distortion. Try 

sending the document again.

• Make a copy of the document on your machine. If the 

copy is also distorted, your machine may need 
service.

The machine doesn't 
receive documents 
automatically.

• Make sure that the reception mode is set to AUTO. If 

you subscribe to a distinctive ring service, make sure 
that the Distinctive Ring function is set to the correct 
ring pattern. If you do not subscribe to a distinctive 
ring service, make sure that Distinctive Ring is set to 
OFF SETTING. (See Distinctive Ring on page 39.)