Sharp AR-M207 ユーザーズマニュアル
32
TROUBLESHOOTING AND MAINTENANCE
Misfeed in B
1
Open the front cover.
Push gently on both ends of the
front cover.
front cover.
2
Turn the roller rotating knob in the
direction of the arrow.
direction of the arrow.
3
Lower the right and left fusing unit
release levers and remove the misfed
paper.
release levers and remove the misfed
paper.
Be careful not to tear the misfed
paper during removal.
paper during removal.
4
Lift the fusing unit release levers.
5
Close the front cover and the side
cover.
cover.
The message "
Clear paper
path." will be cleared and
copying will be possible.
copying will be possible.
The fusing unit is hot. Do not touch
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.
• Do not touch the photoconductive drum
(green portion) when removing the misfed
paper. Doing so may damage the drum
and cause smudges on copies.
paper. Doing so may damage the drum
and cause smudges on copies.
• Take care not to allow unfixed toner on
the misfed paper to soil your hands or
clothes.
clothes.
Roller
rotating knob
rotating knob
Fusing unit release levers
Warning
Caution
• When closing the front cover, gently hold
both ends.
• When closing the side cover, hold the
handle.
• If the message does not clear, check
again to make sure that no pieces of
paper remain.
paper remain.
Note