Sharp AR-M207 ユーザーズマニュアル
34
TROUBLESHOOTING AND MAINTENANCE
MISFEED IN TRAY 2
1
Open the side cover.
Grasp the handle to open the
side cover.
side cover.
2
Remove the misfed paper.
Be careful not to tear the misfed
paper during removal.
paper during removal.
3
If there was no misfed paper in step 2,
pull out tray 2 and remove the misfed
paper.
pull out tray 2 and remove the misfed
paper.
Be careful not to tear the misfed
paper during removal.
paper during removal.
4
Gently close the side cover.
The message "
Clear paper
path." will be cleared and
copying will be possible.
copying will be possible.
5
Gently push tray 2 into the machine.
Push the tray in completely.
• Make sure that there is no misfed paper in the tray before pulling it out. (Page 31)
• Also use the following procedure to remove misfeeds that occur in the 250-sheet paper feed unit and the 2 x
• Also use the following procedure to remove misfeeds that occur in the 250-sheet paper feed unit and the 2 x
500-sheet paper feed unit.
Note
If the message does not clear, check again
to make sure that no pieces of paper
remain.
to make sure that no pieces of paper
remain.
Side cover
Note
Side cover
2 x 250-sheet paper feed unit (AR-D25)