Pitney Bowes DA700 ユーザーズマニュアル

Reason: 

Separators (H-blocks) not set correctly. Also 

feed fence set incorrectly.

Solution:  Adjust H-blocks to thickness of material. See    

page 3-10. Check feed fence position. See page 

3-16.

Reason: 

Envelope thickness knob set too thick.

Solution:  Reduce setting.

Reason: 

Ink cartridge problem.

Solution:  Purge ink cartridge (see page A-24). 

Clean cartridge jets with soft cotton 

cloth and water (in line with color as 

shown). 

 

Change to a new  cartridge. 

Reason: 

Ink supply is low, or media thickness knob is set  

  too high.

Solution:   Check adjustment of the media thickness knob  

(page 3-18). If this fails to correct the problem,  

replace ink cartridge (pages 2-12, 2-13).