Motorola LS3578 ユーザーズマニュアル

1 - 6

Symbol LS3578 Product Reference Guide

The cradle receives power from one of two sources:

An external power supply.

When connected to the host through an interface cable that supplies power.

The cradle detects whether the host or the external supply is supplying power. It always draws power from the 
external supply when available, regardless of the presence of power from a host.

When the cradle is connected to the host via the USB interface, the USB port can power the cradle so that an 
external power supply is not necessary. Note that powering from a USB host charges the scanner at a slower rate 
than when charging from an external power supply.

Symbol’s Synapse Smart Cables enable interfacing to a variety of hosts. The appropriate Synapse cable detects 
the host.

Insert the Synapse adapter cable into the bottom of the cradle, as described in 

.

Align the ‘S’ on the Synapse adapter cable with the ‘S’ on the Synapse Smart Cable and plug the cable in.

Connect the other end of the Synapse Smart Cable to the host.

For information on mounting the cradle, refer to the documentation included with the cradle.

If the scanner does not recognize the host, disconnect the power supply, then reconnect after 
connecting the host cable.

Refer to the Synapse Interface Guide provided with the Synapse cable for more information.

Synapse adapter cable

To cradle

Synapse Smart Cable

To host