Motorola LS3578 ユーザーズマニュアル

1 - 8

Symbol LS3578 Product Reference Guide

To remove the battery:

Insert a coin or flathead screwdriver in the slot at the base of the scanner, then turn the slot counterclockwise 
to release the latch.

Lift the latch.

Turn the scanner upright to slide the battery out.

For best performance, fully charge the scanner battery before using the scanner for the first time. To charge the 
scanner battery, place the scanner in the cradle (see 

). The battery 

begins charging when the scanner LED indicator starts flashing green. A complete charge of a fully discharged 
battery can take up to four hours using external power and up to 10 hours using the interface cable.

Charge within the recommended temperature of 32° to 104° F (0° to 40° C) nominal, 41° to 95° F (5° to 35° C) 
ideal.

For information on maximizing battery life, see 

The scanner’s green LED indicates charging activity (see 

). If the scanner is charging in fast 

mode (non-bus powered mode), the green LED blinks at a fast rate. If the scanner is charging in slow mode 
(bus-powered mode), the LED blinks at a slow rate. 

If the scanner’s red LED begins flashing, indicating a charging problem, remove the scanner from the cradle and 
replace the battery. If the red LED continues flashing, contact Motorola Enterprise Mobility Support.