Canon 5075 ユーザーズマニュアル

Placing Originals

Basic Oper

ations

 

Place the originals into the feeder when you want to copy several originals at the 
same time, and press   (Start). The machine automatically feeds the originals to 
the platen glass and scans them. If you are using the imageRUNNER 5075/5065/
5055, you can select to scan originals as two-sided documents with or without 
being turned over. If you are using the imageRUNNER 5050, the feeder 
automatically turns over two-sided originals to make one or two-sided copies.

•

Weight:

- One-sided scanning: 11 to 32 lb bond (42 to 128 g/m

2

)

- Two-sided scanning: 13 to 32 lb bond (50 to 128 g/m

2

)

•

Size: 11" x 17", LGL, LTR, LTRR, STMT, or STMTR

•

Tray Capacity: up to 100 sheets (20 lb bond (80 g/m

2

))

IMPORTANT

 

•

Thin originals may become creased, if used in a high temperature or high humidity 
environment.

•

Do not place the following types of originals into the feeder:

- Originals with tears or large binding holes

- Severely curled originals or originals with sharp folds

- Clipped or stapled originals

- Carbon backed paper or other originals which may not feed smoothly

- Transparencies and other highly transparent originals

- Originals with a special shape, such as tab paper

•

If the same original is fed through the feeder repeatedly, the original may fold or become 
creased, and make feeding impossible. Limit repeated feeding to a maximum of 30 times 
(this number varies, depending on the type and quality of the original).

•

If the feeder rollers are dirty from scanning originals written in pencil, perform the feeder 
cleaning procedure. (See "Routine Cleaning," on p. 7-50.)

•

Always smooth out any folds in your originals before placing them into the feeder.