Viewsonic VS14693 ユーザーガイド
18
By pressing the [
PIP ON/OFF] button on the remote control, you
can change the mode in the order shown below:
PIP
POP
SBS ASPECT
SBS FULL
OFF
The resolutions in the PIP and POP modes are configured as
follows:
PIP SIZE {
PIP SIZE {
SMALL} : 320 x 240 pixels
{
MIDDLE} : 480 x 320 pixels
{
LARGE} : 640 x 480 pixels
POP SIZE : 474 x 355 pixels
NOTE: The images displayed in the sub picture always fit the
NOTE: The images displayed in the sub picture always fit the
PIP sizes shown above irrespective of the aspect ratio
of the input image.
4.2.5. CONFIGURATION1 menu
PIP
1
2
3
3
SET
EXIT
MENU
1
:SEL
:NEXT
OFF TIMER
SCHEDULE
DATE AND TIME
CONFIGURATION1 RESET
CONFIGURATION1
:RETURN
:EXIT MENU
OFF
OFF TIMER
Set the display to turn itself off to standby mode within an
Set the display to turn itself off to standby mode within an
amount of time specified.
The options are: {
The options are: {
OFF, 1HOUR ~ 24HOURS} from currrent time.
SCHEDULE
This function allows you to program up to 7 (seven) different
This function allows you to program up to 7 (seven) different
scheduled time intervals for the display to activate.
You can select:
• The time for the display to turn on and turn off.
• The days in a week for the display to activate.
• Which input source the display will use for each scheduled
You can select:
• The time for the display to turn on and turn off.
• The days in a week for the display to activate.
• Which input source the display will use for each scheduled
activation period.
NOTE: You should set up current date and time in {
DATE AND
TIME} menu before using this function.
1. Press [
SET] button to enter the submenu.
EXIT
MENU
+-:SEL
:RETURN
:EXIT MENU
SCHEDULE
TODAY
1
2
3
4
5
7
6
2011 . 08 . 04
THU
20 : 19 : 55
ON
＿ : ＿
＿ : ＿
＿
EVERY DAY
OFF
INPUT
WED
SAT
MON
THU
SUN
TUE
FRI
EVERY WEEK
2. Press [ ] or [ ] button to select a schedule item (item
number 1 ~ 7), and then press [
SET] button to mark it the
item number.
EXIT
MENU
+-:SEL
:RETURN
:EXIT MENU
SCHEDULE
TODAY
1
2
3
4
5
7
6
2011 . 08 . 04
THU
20 : 19 : 55
ON
＿ : ＿
＿ : ＿
＿
EVERY DAY
OFF
INPUT
WED
SAT
MON
THU
SUN
TUE
FRI
EVERY WEEK
4
1
2
3
3. Press [ ] or [ ] button to select the schedule:
1
POWER-ON schedule: Press [ ] or [ ] button to set
the hour and minute for the display to turn on.
2
POWER-OFF schedule: Press [ ] or [ ] button to set
the hour and minute for the display to turn off.
Select or leave an empty “
__” for both the hour and minute
slot if you do not want to use this power-on or power-off
schedule.
3
INPUT-SOURCE selection: Press [ ] or [ ] button to
select an input source. If no input source is selected,
the input source will remain the same as last selected.
4
DATE schedule: Press [ ] button to select which day
in a week this schedule item will be take effect, and
then press the [
SET] button.
4. For more schedule settings, press [
EXIT] button and then
repeat the steps above. A check mark in the box next to
the number of the schedule item indicates that the selected
schedule is in effect.
NOTES:
• The {
• The {
EVERY DAY} selection in a schedule item takes priority
over the other weekly schedules.
• If the schedule overlap, the scheduled power-on time takes
priority over scheduled power-off time.
• If there are two schedule items programmed for the same
time, the highest numbered schedule takes priority. For
example, if schedule items #1 and #2 both set the display to
power on at 7:00 AM and off at 5:00 PM, then only schedule
item # 1 will take effect.