Viewsonic VS14693 ユーザーガイド
19
DATE AND TIME
Adjust the current date and time for the display’s internal clock.
Adjust the current date and time for the display’s internal clock.
EXIT
MENU
:SEL
+-:ADJ
:RETURN
:EXIT MENU
DATE AND TIME
YEAR
MONTH
DAY
HOUR
MINUTE
DAYLIGHT SAVING TIME
2011
08
04
20
20
OFF
CURRENT DATE TIME
2011 . 08 . 04
00 : 18 : 10
1. Press [
SET] button to enter the submenu.
2. Press [ ] or [ ] button to toggle among the {
YEAR},
{
MONTH}, {DAY}, {HOUR}, {MINUTE}, and {DAYLIGHT
SAVING TIME} settings.
3. Press [ ] or [ ] button to adjust all settings except
{
DAYLIGHT SAVING TIME}.
CONFIGURATION1 RESET
Reset all settings in the
Reset all settings in the
CONFIGURATION1 menu to factory
preset values.
4.2.6. CONFIGURATION2 menu
PIP
1
2
2
3
SET
EXIT
MENU
2
:SEL
:NEXT
LANGUAGE
OSD TURN OFF
OSD H POSITION
OSD V POSITION
MONITOR ID
IR CONTROL
TILING
POWER ON DELAY
CLOSED CAPTION
CONFIGURATION2 RESET
INFORMATION OSD
MONITOR INFORMATION
CONFIGURATION2
:RETURN
:EXIT MENU
OFF
OFF
50
50
3 SEC.
1
45
LANGUAGE
Select the language used in the OSD menu.
The options are: {
Select the language used in the OSD menu.
The options are: {
} / {
} / {
} /
{
} / {
} / {
} / {
} / {
}.
OSD TURN OFF
Set the period of time the OSD menu stays on the screen.
The options are: {
Set the period of time the OSD menu stays on the screen.
The options are: {
5 ~ 120} seconds.
OSD H POSITION
Adjust the horizontal position of the OSD menu.
OSD V POSITION
Adjust the vertical position of the OSD menu.
Adjust the horizontal position of the OSD menu.
OSD V POSITION
Adjust the vertical position of the OSD menu.
INFORMATION OSD
Set the period of time the information OSD displayed on the
Set the period of time the information OSD displayed on the
upper right corner of the screen. The information OSD will
display when input signal is changed.
The information OSD will remain on the screen with {
The information OSD will remain on the screen with {
OFF}
selection.
The options are: {
The options are: {
OFF, 3 SEC. ~ 10 SEC.}.
MONITOR INFORMATION
Displays the information about your display, including
Displays the information about your display, including
MODEL
NAME and SERIAL.
MONITOR ID
Set the ID number for controlling the display via the RS232C
MONITOR ID
Set the ID number for controlling the display via the RS232C
connection. Each display must have a unique ID number when
multiple sets of this display are connected.
IR CONTROL
Select the operation mode of the remote control unit when
IR CONTROL
Select the operation mode of the remote control unit when
multiple displays are connected via the RS232C connection.
• {
• {
NORMAL} - All displays can be operated normally by the
remote control.
• {
LOCK} - Lock the remote control function of this display. To
unlock, press and hold the [
DISPLAY] button on the remote
control for 5 (five) seconds.
TILING
With this function you can create a single large-screen matrix
With this function you can create a single large-screen matrix
(video wall) that consists of up to
25 sets of this display (up to
5-set each at the vertical and horizontal side). This function
requires a daisy-chain connection.
EXIT
MENU
:SEL
+-:ADJ
:RETURN
:EXIT MENU
TILING
H MONITORS
V MONITORS
POSITION
FRAME COMP.
ENABLE
1
1
1
OFF
OFF
Example: 2 x 2 screen matrix (4 displays)
H MONITORS = 2 displays
V MONITORS = 2 displays
1
2
3
4
H MONITORS
V
MONIT
ORS
Position