Samsung SC-140 ユーザーズマニュアル

2

3

COMPACT

Headphone Connector

The audio output connector enables you to plug stereo headphones into the
drive. It requires a 3.6 mm stereo mini-jack.

Digital Audio

You can connect a sound card or MPEG card which support Digital Audio to
your drive using this two-pin connector. 

Audio Output Connector

You can connect a sound card to your drive using this four-pin connector.  

☛ This function is not covered in detail in this guide. Refer to the documentation 

supplied with your sound card.

Device Configuration Jumper

Usually, this is a pre-set configuration as illustrated below.

☛ Verify that the setting is as illustrated. If it is not, simply remove the jumper 

and place it in the correct position.

Host IDE Interface connector

This input/output interface connector is used to connect the 40-pin flat cable
from the IDE interface to the CD-ROM drive.

Power Connector

The power connector is a four-conductor male plug.

Open/Close-Button

When in play, press the stop key and when in stop, press open/close key.

Disc Tray

The Disc Tray opens and closes automatically when you press the Open/Close
button.
◆ When you place a disc in the tray, make sure that the label on the disc is 

facing upwards. If you are not loading or unloading a disc, the disc tray should 
remain closed.

Emergency Hole

If the disc tray does not open when you press the Open/Close
button, insert a small  metal rod(an unwound paper clip for example) into this 
hole to eject the disc.

☛This function should only be performed when the computer is powered OFF.

Volume Control Dial

This control dial adjusts the volume for your headphones. You can only use the
headphone jack and volume control when you have installed the required software
utilities. For example, the Microsoft Windows Media player can be used.

LED

C
S

S
L

M
A