Seagate ST3000DM001 ユーザーズマニュアル
Barracuda SATA Product Manual, Rev. G
21
Drive Specifications
2.9.5.2
Non-operating shock
3TB, 2TB and 1.5TB models
The non-operating shock level that the drive can experience without incurring physical damage or degradation in
performance when subsequently put into operation is 300 Gs based on a non-repetitive half-sine shock pulse of 2
ms duration.
performance when subsequently put into operation is 300 Gs based on a non-repetitive half-sine shock pulse of 2
ms duration.
1TB, 750GB, 500GB, 320GB and 250GB models
The non-operating shock level that the drive can experience without incurring physical damage or degradation in
performance when subsequently put into operation is 350 Gs based on a non-repetitive half-sine shock pulse of
2-ms duration.
performance when subsequently put into operation is 350 Gs based on a non-repetitive half-sine shock pulse of
2-ms duration.
2.9.5.3
Operating vibration
The maximum vibration levels that the drive may experience while meeting the performance standards specified
in this document are specified below.
in this document are specified below.
All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive
mounting screws. Vibration may be applied in the X, Y or Z axis. Throughput may vary if improperly mounted.
mounting screws. Vibration may be applied in the X, Y or Z axis. Throughput may vary if improperly mounted.
2.9.6 Non-operating vibration
The maximum non-operating vibration levels that the drive may experience without incurring physical damage or
degradation in performance when subsequently put into operation are specified below.
degradation in performance when subsequently put into operation are specified below.
2.10 Acoustics
Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). All
measurements are consistent with ISO document 7779. Sound power measurements are taken under essentially
free-field conditions over a reflecting plane. For all tests, the drive is oriented with the cover facing upward.
measurements are consistent with ISO document 7779. Sound power measurements are taken under essentially
free-field conditions over a reflecting plane. For all tests, the drive is oriented with the cover facing upward.
2Hz to 22Hz
0.25 Gs (Limited displacement)
22Hz to 350Hz
0.50 Gs
350Hz to 500Hz
0.25 Gs
5Hz to 22Hz
3.0 Gs (Limited displacement)
22Hz to 350Hz
3.0 Gs
350Hz to 500Hz
3.0 Gs
Note
For seek mode tests, the drive is placed in seek mode only. The number of seeks per second is defined by the
following equation:
following equation:
(Number of seeks per second = 0.4 / (average latency + average access time
Table 7 Fluid Dynamic Bearing (FDB) motor acoustics
Idle*
Seek
3 Disks
(3TB, 2TB)
2.4 bels (typical)
2.6 bels (max)
2.6 bels (max)
2.6 bels (typical)
2.7 bels (max)
2.7 bels (max)
2 Disks
(2TB, 1.5TB)
2.4 bels (typical)
2.6 bels (max)
2.6 bels (max)
2.6 bels (typical)
2.7 bels (max)
2.7 bels (max)
1 Disk
(1TB, 750GB)
2.2 bels (typical)
2.3 bels (max)
2.3 bels (max)
2.3 bels (typical)
2.4 bels (max)
2.4 bels (max)