Seagate ST3000VM002 ユーザーズマニュアル
Video 3.5 HDD SATA Product Manual, Rev. A
17
Drive Specifications
activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the drive
accepts all commands and returns to Active mode when disk access is necessary.
accepts all commands and returns to Active mode when disk access is necessary.
2.9
Environmental specifications
This section provides the temperature, humidty, shock, and vibration specifications for Video 3.5 HDDs. This
section provides the temperature, humidity, shock, and vibration specifications.
section provides the temperature, humidity, shock, and vibration specifications.
2.9.1 Drive case temperature
Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Above
1000ft. (305 meters), the maximum temperature is derated linearly by 1°C every 1000 ft. Drive case temperature
should be measured at the location indicated in
1000ft. (305 meters), the maximum temperature is derated linearly by 1°C every 1000 ft. Drive case temperature
should be measured at the location indicated in
2.9.2 Ambient Temperature
2.9.3 Temperature gradient
2.9.4 Humidity
2.9.4.1
Relative humidity
2.9.4.2
Wet bulb temperature
2.9.5 Altitude
Operating
0° to 75°C (32° to 167°F)
Non-operating
–40° to 70°C (–40° to 158°F)
Operating
20°C per hour (68°F per hour max), without condensation
Non-operating
30°C per hour (86°F per hour max)
Operating
5% to 90% non-condensing (30% per hour max)
Nonoperating
5% to 95% non-condensing (30% per hour max)
Operating
37.7°C (99.9°F max)
Non-operating
40°C (104°F max)
Operating
–304m to 3048m (–1000 ft. to 10,000 ft.)
Non-operating
–304m to 12,192m (–1000 ft. to 40,000+ ft.)