Seagate ST9550AG ユーザーズマニュアル
The dealer partitioned and high-level formatted the drive for
you in the store. Later, you installed the drive and it does
not work.
you in the store. Later, you installed the drive and it does
not work.
•
Reboot the computer and make sure the drive spins up.
•
Check all cables.
•
Check the power supply.
•
Check your DOS version. Call your dealer to make sure the
DOS version the dealer used to partition and high-level format
the drive is the same as the version you have installed on your
computer.
DOS version the dealer used to partition and high-level format
the drive is the same as the version you have installed on your
computer.
•
Verify the BIOS drive type. When you run the system setup
program on your computer, you must specify the same BIOS
drive type or translation geometry that the dealer used.
program on your computer, you must specify the same BIOS
drive type or translation geometry that the dealer used.
•
Check for memory conflicts.
•
Check for viruses.
During the FDISK program, you get an error message warn-
ing of an attempt to write to track 0 or to the boot sector; the
message may also suggest that a virus is present.
ing of an attempt to write to track 0 or to the boot sector; the
message may also suggest that a virus is present.
•
This occurs in systems having a virus-protection scheme that
does not allow programs to modify the boot sector of the disc.
See your system manual for details. To avoid the problem, run
the system setup program and turn off the virus-protection option.
Then exit system setup and run the FDISK and FORMAT
programs. After all drive partitions are formatted, use the system
setup program to turn virus protection on again.
does not allow programs to modify the boot sector of the disc.
See your system manual for details. To avoid the problem, run
the system setup program and turn off the virus-protection option.
Then exit system setup and run the FDISK and FORMAT
programs. After all drive partitions are formatted, use the system
setup program to turn virus protection on again.
During the FDISK program, the computer hangs or fails to
create or save the partition record.
create or save the partition record.
•
Check all cables.
14
ST9655 Family Installation Guide, Rev. A