Seagate ST380215ACE ユーザーズマニュアル

DB35.3 Series SATA/PATA Product Manual, Rev. F

11

Actual drive case temperature should not exceed

 

75°C (167°F). Recommended measurement locations are 

shown in Figure 3 on page 18.

Above 1,000 feet (305 meters), the maximum temperature is derated linearly to 44°C (112°F) at 10,000 feet 
(3,048 meters).

All shock specifications assume that the drive is mounted securely with the input shock applied at the drive 
mounting screws. Shock may be applied in the X, Y or Z axis.

These drives comply with the performance levels specified in this document when subjected to a maximum 
operating shock of 63 Gs based on half-sine shock pulses of 2 msec. Shocks should not be repeated more 
than two times per second.

The nonoperating shock level that the drive can experience without incurring physical damage or degradation 
in performance when subsequently put into operation is 350 Gs based on a nonrepetitive half-sine shock pulse 
of 2 msec duration.

All vibration specifications assume that the drive is mounted securely with the input vibration applied at the 
drive mounting screws. Vibration may be applied in the X, Y or Z axis.

Operating

20°C per hour (68°F per hour max), without condensation

Nonoperating

30°C per hour (86°F per hour max)

Operating

5% to 90% noncondensing (30% per hour max)

Nonoperating

5% to 95% noncondensing (30% per hour max)

Operating

37.7°C (99.9°F max)

Nonoperating

40.0°C (104.0°F max)

Operating

–60.96 m to 3,048 m (–200 ft. to 10,000+ ft.)

Nonoperating

–60.96 m to 12,192 m (–200 ft. to 40,000+ ft.)