Seagate ST900MM0026 ユーザーズマニュアル

8

Savvio 10K.4 FC Product Manual, Rev. A

Using the Mode Select command, the drive can change its capacity to something less than maximum. See the 
Mode Select Parameter List table in the SCSI Commands Reference Manual. Refer to the Parameter list block 
descriptor number of blocks field. A value of zero in the number of blocks field indicates that the drive shall not 
change the capacity it is currently formatted to have. A number in the number of blocks field that is less than 
the maximum number of LBAs changes the total drive capacity to the value in the block descriptor number of 
blocks field. A value greater than the maximum number of LBAs is rounded down to the maximum capacity.

You may order the following items which are incorporated at the manufacturing facility during production or 
packaged before shipping. Some of the options available are (not an exhaustive list of possible options):

• Other capacities can be ordered depending on sparing scheme and sector size requested.

• Single-unit shipping pack. The drive is normally shipped in bulk packaging to provide maximum protection 

against transit damage. Units shipped individually require additional protection as provided by the single unit 
shipping pack. Users planning single unit distribution should specify this option.

• The  Safety and Regulatory Agency Specifications, part number 75789512, is usually included with each 

standard OEM drive shipped, but extra copies may be ordered.

The following accessories are available. All kits may be installed in the field.

• Evaluation kit, part number 73473641.

 

This kit provides an adapter card (“T-card”) to allow cable connections for two FC ports and DC power.

• Single-unit shipping pack.