AMCC 720-0138-00 ユーザーズマニュアル
Chapter 6. Maintaining Units
78
3ware Serial ATA RAID Controller User Guide for the Power Mac G5
Figure 29. Selecting Task Schedules to View
Turning On or Off Use of a Task Schedule
Turning on the schedule for Rebuild/Migrate and Verify tasks forces rebuilds,
migrates, and verifies to be performed only during the time specified by the
schedule. If the schedule is not turned on, rebuilds, migration, initialization,
and verify can happen whenever they are required or are manually started.
migrates, and verifies to be performed only during the time specified by the
schedule. If the schedule is not turned on, rebuilds, migration, initialization,
and verify can happen whenever they are required or are manually started.
There may be times when you want to disable scheduled rebuild/migrate or
verify tasks, so that you can rebuild, migrate, or verify a unit right away,
without waiting for the next scheduled time. In this case, you can disable the
schedule, as described below.
verify tasks, so that you can rebuild, migrate, or verify a unit right away,
without waiting for the next scheduled time. In this case, you can disable the
schedule, as described below.
You can easily disable a current Verify or Rebuild/Migrate schedule without
deleting the schedule itself.
deleting the schedule itself.
To turn on or off use of the current Verify or Rebuild task
schedule
schedule
1
Choose
Management > Schedule
from the menu bar.
The Scheduling page appears, showing the schedule for Rebuild/Migrate
Tasks.
Tasks.
2
To view Verify Tasks, select it from the drop-down list at the top of the
page.
page.
Note:
When you first use 3DM, daily schedules exist with 24 hour duration—that is,
the schedule is for “all the time.” Until you change these 24-hour daily schedule,
enabling the schedule will not have any direct effect.
enabling the schedule will not have any direct effect.