Fujitsu P19-3 ユーザーズマニュアル

SCENICVIEW B17-3/B19-3/P19-3  

 

Information on the computer connections and interfaces is contained in the operating manual for your 
computer. 

 

 

If your computer has two monitor ports ("onboard" screen controller and separate 
graphics card), the monitor port for the separate graphics card is usually active.  

 

 

► 

Connect the data cable to the (active) monitor port on the computer and secure the plug-in 
connection by tightening the safety screws. 

► 

Insert the other plug of the audio line in the audio output of the computer. 

► 

Plug the connector of the mains cable provided into the monitor outlet of the computer or into a 
properly earthed outlet and ensure a safe connection. 

► 

Plug the power connector of the computer into a properly grounded mains outlet. 

 

When you start working with your monitor for the first time you should install the 
appropriate graphics drivers for your application software. Details of how to do this are 
provided in the documentation on your screen controller/the associated driver software. 

 

The monitor offers the following possibilities that enable it to be optimally adjusted for the respective 
user and the respective situation. 

The height of the monitor can be adjusted by approximately 120 mm. 
► 

Grasp the monitor with both hands on the right and left edge of the casing and move it up or 
down. 

The rake of the monitor can be adjusted by -2° (forward) and +35° (back) from its vertical position. 
► 

Grasp the monitor with both hands on the right and left edge of the casing and adjust it to the 
desired rake. 

The monitor can be turned horizontally by approximately 90° from its central position. 
► 

Grasp the monitor with both hands on the right and left edge of the casing and turn it to the 
desired position. 

14 

A26361-K1143-Z120-1-7619, edition 3