Fujitsu P19-3 ユーザーズマニュアル

 

SCENICVIEW B17-3/B19-3/P19-3  

The monitor can be turned from the "wide format" (landscape mode) into the "high format" position 
(portrait mode). 
► 

Grasp the monitor with both hands on the right and left edge of the casing, move it into the 
highest position and turn it clockwise until it is in the portrait position. 

 

You must use corresponding software (pivot software) so that the screen display is also 
shown in the portrait mode. This software is included in the delivery (CD-ROM) and must 
be installed on your computer. 

 

 

► 

In the OSD menu you have the option of switching the OSD manually from landscape mode 
into portrait mode (see section "Monitor settings using the OSD menu"). 

To reset the monitor to the landscape mode, the monitor must be turned counter-clockwise. The 
OSD display can be reset again in the OSD menu. 

The ON/OFF switch at the front is used for switching the monitor on and off.  

 

3 2

1

 

3
2

1

 

 

1 =  Buttons for the OSD menu 

(On-Screen-display) 

2 =  ON/OFF switch 
3 =  Power indicator 

 

The buttons are to be pressed from the bottom upwards. 

 

 

A26361-K1143-Z120-1-7619, edition 3 

15