Fluke A20M-AF ユーザーズマニュアル
RPM4/HPMS A70M/A20M-AF OPERATION AND MAINTENANCE MANUAL
© 2007 DH Instruments, a Fluke Company
Page 14
It is normal for RPM4 to indicate a value other than zero when vented when
gauge mode is first entered or ranges are changed, especially if AutoZ is OFF, RPM4
has been OFF for some time or its location has changed.
2.6
SHORT TERM STORAGE
The following is recommended for short term storage of RPM4/HPMS:
• Vent the RPM4/HPMS TEST port.
• Switch the RPM4 power OFF.
• Switch the RPM4 power OFF.
2.7
LONG TERM STORAGE AND/OR PREPARATION FOR
SHIPPING
SHIPPING
The following is recommended for long term storage and or shipping of RPM4/HPMS:
• Plug the HPMS TEST port.
• Place the RPM4/HPMS in a plastic bag.
• Place the RPM4/HPMS in the custom shipping/storage case in which it was delivered.
• Place the RPM4/HPMS in a plastic bag.
• Place the RPM4/HPMS in the custom shipping/storage case in which it was delivered.