Siemens PCS7 ユーザーズマニュアル
Product Information
PCS7/TM V2.02
24.10.2001
Siemens AG 2001
8 of 21
The image blocks in TELEPERM M-NORA representation and the authorization DLLs that are re-
quired for proper operation are in the directory sw\OCX_TM on the CD.
quired for proper operation are in the directory sw\OCX_TM on the CD.
The authorization is supplied on a separate floppy disk.
This package must be installed in all computers that shall be used for operator communication and
visualization.
visualization.
- Single-user system, also ES
- Multi-clients or Clients
- Server, if it is operator station at the same time.
- Multi-clients or Clients
- Server, if it is operator station at the same time.
3.5.1
Procedure of the manual installation
•
There is an older version of WinCC /TM-OCXs (NORA) in your computer and the objects
WinCC/TM-OCX (NORA) and VB5_DLL are contained in the "Settings/System con-
trol/Software" tab:
WinCC/TM-OCX (NORA) and VB5_DLL are contained in the "Settings/System con-
trol/Software" tab:
Uninstall these two objects.
•
To install the image blocks in TELEPERM M NORA representation branch to the SW\
OCX_TM directory and invoke Setup.exe there. The rest of the installation procedure will be
prompted. Also install the VB6_DLL (in the same setup).
If not already done explicitly at the beginning any existing installation will be removed during
this process.
The "Prototype images" option can be used for copying these images into the corresponding
WinCC folder from where they will be copied into the project when the Split Screen Wizard
executed.
OCX_TM directory and invoke Setup.exe there. The rest of the installation procedure will be
prompted. Also install the VB6_DLL (in the same setup).
If not already done explicitly at the beginning any existing installation will be removed during
this process.
The "Prototype images" option can be used for copying these images into the corresponding
WinCC folder from where they will be copied into the project when the Split Screen Wizard
executed.
•
The authorization must be transferred to the same drive as the other PCS7 authorizations. To
do this, please insert the authorization floppy disk into the drive and double-click on the
Authors.exe or Authorsw.exe program (same procedure as for other PCS7/ WinCC compo-
nents).
Of course, this step is only necessary if an authorization has not yet been installed.
do this, please insert the authorization floppy disk into the drive and double-click on the
Authors.exe or Authorsw.exe program (same procedure as for other PCS7/ WinCC compo-
nents).
Of course, this step is only necessary if an authorization has not yet been installed.
The image blocks in TELEPERM M NORA representation are now ready for the configuration in the
WinCC-Graphics Designer.
3.5.2
Revision levels
•
Elemente.ocx
V3.00.00
•
TM_x.ocx
V3.00.00
(x stands for the different block types)
•
TM_MKS.ocx
V3.00.00
•
TM_Sym
V3.00.00
•
TM_AS215
V3.00.00
•
TelepermMOCX.dll
V1.0.0.3
Image blocks (OCX) for the five standard function blocks TRAS, TRB, TRES, TRM and TRR are pro-
vided for the operation with AS 215. Their utilization is subject to change.
3.5.3
What to do after the installation ?
After the successful installation all optionally installed prototype images may be copied with the
WinCC-Split Screen Wizard into the current project.