Omron C200HE ユーザーズマニュアル
135
SECTION 5
Instruction Set
The C200HX/HG/HE PCs have large programming instruction sets that allow for easy programming of complicated control
processes. This section explains instructions individually and provides the ladder diagram symbol, data areas, and flags used
with each.
The C200HX/HG/HS PCs can process more than 100 instructions that require function codes, but only 100 function codes (00
to 99) are available. Some instructions, called expansion instructions, do not have fixed function codes and must be assigned
function codes from the 18 function codes set aside for expansion instructions before they can be used.
The many instructions provided by the C200HX/HG/HE PCs are organized in the following subsections by instruction group.
These groups include Ladder Diagram Instructions, Bit Control Instructions, Timer and Counter Instructions, Data Shifting
Instructions, Data Movement Instructions, Data Comparison Instructions, Data Conversion Instructions, BCD Calculation
Instructions, Binary Calculation Instructions, Logic Instructions, Subroutines, Special Instructions, Network Instructions,
Serial Communications Instructions, Advanced I/O Instructions, and Special I/O Unit Instructions.
Some instructions, such as Timer and Counter instructions, are used to control execution of other instructions, e.g., a TIM
Completion Flag might be used to turn ON a bit when the time period set for the timer has expired. Although these other
instructions are often used to control output bits through the Output instruction, they can be used to control execution of other
instructions as well. The Output instructions used in examples in this manual can therefore generally be replaced by other
instructions to modify the program for specific applications other than controlling output bits directly.
processes. This section explains instructions individually and provides the ladder diagram symbol, data areas, and flags used
with each.
The C200HX/HG/HS PCs can process more than 100 instructions that require function codes, but only 100 function codes (00
to 99) are available. Some instructions, called expansion instructions, do not have fixed function codes and must be assigned
function codes from the 18 function codes set aside for expansion instructions before they can be used.
The many instructions provided by the C200HX/HG/HE PCs are organized in the following subsections by instruction group.
These groups include Ladder Diagram Instructions, Bit Control Instructions, Timer and Counter Instructions, Data Shifting
Instructions, Data Movement Instructions, Data Comparison Instructions, Data Conversion Instructions, BCD Calculation
Instructions, Binary Calculation Instructions, Logic Instructions, Subroutines, Special Instructions, Network Instructions,
Serial Communications Instructions, Advanced I/O Instructions, and Special I/O Unit Instructions.
Some instructions, such as Timer and Counter instructions, are used to control execution of other instructions, e.g., a TIM
Completion Flag might be used to turn ON a bit when the time period set for the timer has expired. Although these other
instructions are often used to control output bits through the Output instruction, they can be used to control execution of other
instructions as well. The Output instructions used in examples in this manual can therefore generally be replaced by other
instructions to modify the program for specific applications other than controlling output bits directly.
5-1
Notation
138
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-2
Instruction Format
138
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-3
Data Areas, Definer Values, and Flags
138
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-4
Differentiated Instructions
140
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-5
Expansion Instructions
141
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-6
Coding Right-hand Instructions
142
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-7
Instruction Set Lists
145
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-7-1
Function Codes
145
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-7-2
Alphabetic List by Mnemonic
145
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-8
Ladder Diagram Instructions
149
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-8-1
LOAD, LOAD NOT, AND, AND NOT, OR, and OR NOT
149
. . . . . . . . . . . . . . . . . . . . . . .
5-8-2
AND LOAD and OR LOAD
150
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-9
Bit Control Instructions
150
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-9-1
OUTPUT and OUTPUT NOT – OUT and OUT NOT
150
. . . . . . . . . . . . . . . . . . . . . . . . . . .
5-9-2
DIFFERENTIATE UP and DOWN – DIFU(13) and DIFD(14)
151
. . . . . . . . . . . . . . . . . . . .
5-9-3
SET and RESET – SET and RSET
153
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-9-4
KEEP – KEEP(11)
154
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-10
INTERLOCK and INTERLOCK CLEAR – IL(02) and ILC(03)
155
. . . . . . . . . . . . . . . . . . . . . . . . . .
5-11
JUMP and JUMP END – JMP(04) and JME(05)
157
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-12
END – END(01)
158
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-13
NO OPERATION – NOP(00)
158
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-14
Timer and Counter Instructions
158
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-14-1
TIMER – TIM
159
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-14-2
HIGH-SPEED TIMER – TIMH(15)
164
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-14-3
TOTALIZING TIMER – TTIM(87)
165
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-14-4
COUNTER – CNT
166
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-14-5
REVERSIBLE COUNTER – CNTR(12)
169
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-15
Data Shifting
171
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-15-1
SHIFT REGISTER – SFT(10)
171
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-15-2
REVERSIBLE SHIFT REGISTER – SFTR(84)
173
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-15-3
ARITHMETIC SHIFT LEFT – ASL(25)
175
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-15-4
ARITHMETIC SHIFT RIGHT – ASR(26)
175
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-15-5
ROTATE LEFT – ROL(27)
176
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-15-6
ROTATE RIGHT – ROR(28)
176
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-15-7
ONE DIGIT SHIFT LEFT – SLD(74)
177
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-15-8
ONE DIGIT SHIFT RIGHT – SRD(75)
177
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-15-9
WORD SHIFT – WSFT(16)
178
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-15-10 ASYNCHRONOUS SHIFT REGISTER – ASFT(17)
178
. . . . . . . . . . . . . . . . . . . . . . . . . . .
5-16
Data Movement
180
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-16-1
MOVE – MOV(21)
180
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-16-2
MOVE NOT – MVN(22)
180
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .