Omron C200HE ユーザーズマニュアル

In the following example, the 100 word range from DM 7000 through DM 7099 is
copied to DM 0010 through DM 0109 when IR 00001 is ON.

@XDMR(––)

#7000

#0100

00001

DM 0010

00000

LD

00001

00001

@XDMR(––)

#

0100

#

7000

DM

0010

DM 7000

DM 9999

DM 7000 to DM 7099

DM 0000

DM 6143

DM 0010 to DM 0109

@IEMS(––)

C

C: Control word

000, #E000, or #E0B1 to #E0B3

IEMS(––)

C

C must be 000, #E000, #E0B0, #E0B1, or #E0B2.

When executed with an ON execution condition, IEMS(––) changes the destina-
tion of indirect DM addressing (

DM) to DM or the specified EM bank. The cur-

rent EM bank number can also be changed when indirect addressing is changed
to EM.
The destination for 

DM is switched to the DM area at the start of an interrupt

subroutine. It is also returned to the DM area at the beginning of each scan.
The following table shows the allowed values for C and their functions:

000

Switches the destination of 

DM to the DM area.

#E000

Switches the destination of 

DM to the current bank in the EM area.

#E0B0

Switches the destination of 

DM to the bank 0 in the EM area.

#E0B1

Switches the destination of 

DM to the bank 1 in the EM area.

#E0B2

Switches the destination of 

DM to the bank 2 in the EM area.

The content of DM 6031 indicates the current 

DM destination and the current

EM bank number as shown in the following table. Use DM 6031 in the ladder-dia-
gram program to determine if the contents of indirect DM addressing is the DM or
EM area. (Programming Devices cannot be used here because bits 08 to 15 will
always indicate the DM area when read from the Programming Device.)

DM 6031

Current EM bank number (00 to 02)

DM destination (00: DM; 80: EM)